Fluke                                                       MET/CAL Procedure
=============================================================================
INSTRUMENT:            Fluke 712: (1 year) CAL VER /5520,3458
DATE:                  02-Feb-98
AUTHOR:                Fluke Corporation
REVISION:              $Revision: 1.1 $
ADJUSTMENT THRESHOLD:  70%
NUMBER OF TESTS:       10
NUMBER OF LINES:       103
CONFIGURATION:         Fluke 5520A
CONFIGURATION:         HP 3458A
=============================================================================
#
# Fluke makes no warranty, expressed or implied, as to the fitness
# or suitability of this procedure in the customer's application.
#
# Source:
#   Fluke 712 Cal & Verification Test Information
#   Sheet dated October 31,1997.
#
# Compatibility:
#   MET/CAL 5.0 or later
#
# Subprocedures:
#   None
#
# Required Files:
#   55_712.bmp
#   58_712.bmp
#
 STEP    FSC    RANGE NOMINAL        TOLERANCE     MOD1        MOD2  3  4 CON
  1.001  ASK-   R     N              P                            F        W
  1.002  ASK+           K                              X
  1.003  HEAD         PRELIMINARY INSTRUCTIONS AND EQUIPMENT SET-UP
  1.004  DISP         Ensure that the UUT has been allowed to stabilize
  1.004  DISP         in an environment with an ambient temperature of
  1.004  DISP         18 to 28degC and relative humidity of less than 90%.
  1.005  HEAD         {RESISTANCE MEASUREMENT MODE TEST}
  1.006  HEAD         RESISTANCE MEASUREMENT MODE TEST
  1.007  PIC          55_712
  1.008  DISP         Turn(POWER ON) to the UUT.
  1.009  DISP         Press (RTD TYPE) key until "TYPE R" is displayed.
  1.009  DISP         Press the (INPUT/OUTPUT key and the LARGE UP and
  1.009  DISP         DOWN ARROWS until the UUT indicates INPUT TYPE R 4W.
  1.013  5520         207.5Z         0.1U                                  2W
  2.001  5520         950.0Z         0.5U                                  2W
  3.001  5520         2350.0Z        1.0U                                  2W
  4.001  5520         *                                                 S
  4.002  DISP         Disconnect all TEST LEADS.
  4.003  DISP         Press the INPUT/OUTPUT key to
  4.003  DISP         select OUTPUT TYPE R.
  4.004  HEAD         {RESISTANCE SOURCE MODE TEST}
  4.005  HEAD         RESISTANCE SOURCE MODE TEST
  4.006  PIC          58_712
  4.007  DISP         [32]      Set the UUT to OUTPUT 207.5 Ohms.
  4.008  M3458  RNGLK 1kZ
  4.009  3458         207.5Z         0.1U                         O        4W
  5.001  M3458  RNGLK 10kZ
  5.002  DISP         [32]      Set the UUT to OUTPUT 950 Ohms.
  5.003  3458         950.0Z         0.5U                         O        4W
  6.001  DISP         [32]   Set the UUT to OUTPUT 2350.0 Ohms.
  6.002  3458         2350.0Z        1.0U                         O        4W
  7.001  M3458        *
  7.002  HEAD         {KEYPAD TEST}
  7.003  DISP         Using the LARGE (DOWN) scroll key,scroll down to
  7.003  DISP         source 950.0 Ohms output.
  7.004  MESS         Using the SMALL (UP) scroll key verify the diplay
  7.004  MESS         scrolls in increments of .001, the .01 and finally .1.
  7.005  MATH         MEM2 = "Did the display scroll up?"
  7.006  EVAL   -s MEM2:Did UUT display scroll up in values of(.001,.01,.1)?
  8.001  MESS         Using the small (DOWN) scroll key verify the diplay
  8.001  MESS         scrolls in increments of .001, the .01 and finally .1.
  8.002  MATH         MEM2 = "Did the display scroll down?"
  8.003  EVAL   -s MEM2:Did UUT display scroll down in values of(.001,.01,.1)?
  9.001  HEAD         {LCD DISPLAY TEST}
  9.002  DISP         PRESS and HOLD the (INPUT/OUTPUT) key.
  9.002  DISP         TURN ON the UUT and release the (GREEN)
  9.002  DISP         POWER KEY. All LCD segments will stay on
  9.002  DISP         while the (INPUT/OUTPUT) key is depressed.
  9.003  MESS         Observe the UUT LCD Display.
  9.004  MATH         MEM2 = "Are all LCD Segments displayed?"
  9.005  EVAL   -s MEM2:Are all LCD Segments displayed?
 10.001  END
#! T.U.R.s less than 4.00:                  2
#! T.U.R.s estimated using RANGE value:     0
#! T.U.R.s not calculated (ASK- U):         0
#! T.U.R.s not computable at compile time:  0
#! FOR JUSTIFICATION REFER TO COMMENTS FOLLOWING EACH TEST IN THIS LISTING.